Drzwi antywłamaniowe dwuskrzydłowe DONIMET DL1.4/2 DRAGON

Double-wing security door DONIMET DL1.4/2 DRAGON

zł12,600.01

TECHNICAL CHARACTERISTICS
STANDARD DOOR DL1.4/2

• 3 [mm] thickness and EPDM seal on three edges
• jacket wings made of sheet steel of thickness
1.0 [mm], wing without additional 45 [mm] thick covers with EPDM seal on four edges
• mineral wool filling with a density of 60 [kg/m3]
• bearing hinges: 3/wing
• balance locks: 3/wing
• Class 6 lift lock
• wing weight without additional covers – 30 [kg/m2]
• powder-coated surface in any RAL colour
• price for doors with a maximum dimension in the light of the door frame 2000 x 2050 [mm]

They are produced in any dimensions. The door wings are made of two sheets of steel sheet 1.0 mm thick, shaped by the cold bending method and forming the lining of the door leaf. The design is reinforced with catacos, and the space between the profiles is filled with mineral wool. The wings on all four edges have adhesives with a seal. The wings are suspended on three hinges ø20 with rolling bearings, on a door frame made of cold bent and angular profile, with a pendurgical lic. The door frames are equipped with a threshold of 20 [mm] as standard. The hinge side protection consists of three balance locks. DL1.4/2 DRAGON doors can be used as exterior, interior doors, open to the outside and inside of the room.

DOOR CHARACTERISTICS DL1.4:

• burglary resistance – RC4 class according to EN 1627:2012
• burglary resistance – Class C according to PN-90/B-92270
• multiple closing and opening resistance – Class 6
according to PN-EN 12400: 2004
• wind load resistance – Class C2 according to EN 12210: 2001
• corrosion resistance – category C3 according to PN-EN ISO 12944-2: 2001
• waterproof – class 3B according to EN 12208: 2001
• sound insulation – Rw= 35 [dB] according to PN-EN ISO 717-1: 2013-08
• thermal permeability – 1.3 Uw(W/m2×K) according to PN-EN ISO 10077-1: 2007
• air permeability – class 2 according to PN-EN 12207: 2001
• operating forces – class 2 according to EN 12217: 2005
• mechanical strength – class 2 according to PN-EN 1192: 2001

ADDITIONAL OPTIONS

• changing door dimensions
• additional lock

SURFACE FINISH:

• glued with PVC-like wood veneer
• covered with a lacquered MDF 6 or 10 [mm]
• covered with a plywood plate veneered with natural oak veneer of thickness
6 or 10 [mm]
• DL1.4/2 doors can be glazed with anti-burglary glass from Class P4 to P6, in different shapes and arrangements, and made in a version with full or glazed uppers and side extras.

See surface design and finish